FAST TOUCH - panic exit device, rim version

Product Description

 

The rim version panic exit devices from the FAST series can be installed as supplied, ensuring quick, low-cost fitting. They are available in every model and colour with the special CISA FAST PLUS antibacterial treatment.

Aesthetic continuity.
New design with cleaner, crisper lines which convey the strength and durability of the product.
The rim version panic exit devices in the FAST range consist of the PUSH and TOUCH versions, both with the same design features, so different products can be installed in the same environment and still blend in with the surroundings.
Different finishes (PDV coated stainless steel, satin-finished, grey, white... ).

Versatility, two types of panic exit device perfectly coordinated.
The range includes versions with one, two or three locking points, and is completely modular.
Wide range of accessories, all interchangeable between the PUSH and TOUCH range, including additional locks and outside devices.


Reliability guaranteed

The FAST range is certified in accordance with EN 1125 and is CE-marked. The entire range has been tested beyond the normal parameters requested by the regulations, up to 500,000 cycles with doors weighing 400 kg (double the regulatory requirement).
Also available in the fire door version.

Easy and quick maintenance.
Clip-on cover with spring mechanism, no screws needed, so ordinary maintenance can be carried out quickly in compliance with regulations.

Low noise.
The cable used in the FAST range to connect additional locks reduces the operating noise associated with traditional extended bolts.

Completely modular system, support plates for installing additional locks, flexible cable to connect additional locks to the main mechanism with the quick-lock system, adjustable additional locks with quick-lock system, bar with front fixing (Push range), clip-on cover with spring mechanism, no screws required, design with cleaner, crisper lines which enhance the strength and durability of the product. The FAST range is certified in accordance with EN 1125 and is CE-marked, it has been successfully tested on up to 500,000 opening cycles with doors weighing 400 kg, double the mandatory requirement. Wide range of accessories which are interchangeable between the three ranges, Push, Touch and Push Pad, version for fire doors also available.

Features

Technical features

  • Painted aluminium/aluminium alloy cover
  • Painted steel bar which can be shortened to 300 mm on all models
  • Chrome-plated aluminium alloy dead-locking latch bolt

Supplied as standard

  • Completely modular system.
  • Support plates for installing additional locks
  • Flexible cable which quickly connects additional locks to the main mechanism.
  • Adjustable additional locks installed with a quick-lock system.
  • Bar with front fixing (PUSH range).
  • Clip-on cover with spring mechanism, no screws needed.
  • Special strikers
  • Fixing screws
  • ICIM and CE certificates
  • Installation and maintenance instructions

On request

  • Outside access devices
  • Extended bolts
  • Version with micro switch
  • Version with hold open device
  • Version for fire doors with steel latch bolt

Finishes

Standard

  • Black cover with red bar

 

On request

  • Red cover with black bar
  • Yellow cover with black bar
  • Green cover with black bar
  • Black cover with black bar
  • White cover with white bar
  • Grey cover with grey bar
  • Painted stainless grey cover and bar
  • PVD coated satin-finished stainless steel

Standards

  • CE marking in accordance with 89/106/ EEC DIRECTIVE, issued by ICIM
  • Voluntary certification issued by the independent certifying body ICIM according to UNI EN 1125

Downloads

VIDEO

 

DOWNLOADS

Instruction sheet

Outside access devices

Instruction sheet

Additional locking points with deadbolt

Instruction sheet

Additional locking points with latch bolts

Instruction sheet

Additional locking point with lateral latch bolt

Brochure

FAST panic exit devices